Tungsten Carbide Cutting Tips With Hole,Carbide Hardware Tools,
Plastic Cutters, Paper Cutters, Aluminum Cutters, Etc.
The cemented carbide is formed by powder metallurgy, heated under
vacuum, and undergoes the vacuum dewaxing sintering process, which
is beneficial to remove impurities, improve the purity of the
sintering atmosphere, improve the wettability of the binder phase,
promote the reaction, and finally form a compact with a certain
chemical The composition and physical and mechanical properties of
the structure of cemented carbide.
| GRADE | ISO | DENSITY | HARDNESS | TRS | Applications recommended |
| GRADE | (g/cm3) | (HRA) | (N/mm2) |
| YG3 | K05 | 15.1 | 92 | 1400 | Suitable for finishing of cast iron and nonferrous metal. |
| YG6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals
and also for the machining of manganese steel and hardening steel. |
| YG6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG8 | K20 | 14.8 | 89.5 | 2200 |
| YW1 | M10 | 13.1 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and
conventional alloy steel. |
| W2 | M20 | 13 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and
low-alloy steel and it is mainly used for the machining of railway
wheel hubs. |
| YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast
steel with a moderate feed rate and rather high cutting speed. |
| YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast
steel. |
| YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a
big feed rate at a medium and low speed under unfavorable working
conditions. |
Carbide rods are mainly used for drills, end mills, and reamers. It can also be used for cutting, punching and measuring tools. It is used in paper, packaging, printing, non-ferrous metal
processing industries. In addition, it is also widely used in machining high-speed steel
tools, carbide milling cutters, carbide tools, cutting tools,
aviation tools, carbide drills.
Characteristics: high hardness,wear resistance, good strength and
toughnesss,heat resistance,corrosion resistance.
The production process of cemented carbide strips, first of all,
the production and shaping process of the strips, what kind of mold
and raw materials are used, according to the shrinkage coefficient
and the required product specifications, design the pressing
thickness, pressing unit weight, pressure, holding time, etc. .
Actual manufacturing process,After receiving the process sheet, the
operator first takes the material, checks the equipment, weighs the
unit weight, then fills and scrapes the material, and then presses
and forms under the pressure of the pressure cylinder, and then
demolds, and the pre-formed product comes out. .
