Excellent Strength Tungsten Carbide Bar With Untrafine Grain Size
Material
Tungsten Carbide Bar Description:
Tungsten Carbide Bar or Hard Alloy Bars Blank has high hardness and
high wear resistance, it is a ideal choice to used in cutting kinds
of wood.
Tungsten Carbide products are widely used as tool material, such as
turning tool, milling cutter, planer knife, bit, boring cutter,
etc., used for cutting cast iron, non-ferrous metal, plastics,
chemical fiber, graphite, glass, stone and ordinary steel, also can
be used for cutting refractory steel, stainless steel, high
manganese steel, tool steel and other difficult materials.
Tungsten Carbide round rod is a tungsten steel round rod.In simple
terms, a tungsten steel round rod or a hard alloy round
rod.Tungsten carbide round bar/rod has high hardness, wear
resistance, good strength and toughness, heat resistance, corrosion
resistance and a series of excellent properties, especially its
high hardness and wear resistance.
Traditional tool grades and usage recommendations
| Iso classification grouping code | Mark | Density
g/cm³ | Hardness
HRA | Bending strength
≥ MPa | use |
| K01 | YD05 | 14.90 | 93.0 | 1600 | It is specially used for processing various nickel-based,
cobalt-based, iron-based and tungsten carbide-containing
self-fluxing spray alloy materials, and can also be used for the
processing of hardened steel. |
| K05 | YG3X | 15.10 | 91.8 | 1600 | Suitable for finishing, fine boring of cast iron, non-ferrous
metal, heat resistant alloy and titanium alloy. |
| K10 | YD101 | 14.95 | 92.1 | 2500 | It has excellent wear resistance and toughness. It is used for
finishing and finishing of non-ferrous metals and cast irons,
especially for the processing of aluminum and its alloys. Turning
is suitable for medium and high speed, and medium speed is
recommended for milling. |
| YG6X | 14.95 | 91.5 | 2300 | Suitable for finishing of cast iron, non-ferrous metals,
heat-resistant alloys and titanium alloys. |
| K20 | YG6 | 14.95 | 89.5 | 2000 | Suitable for semi-finishing and light-load roughing of cast iron,
non-ferrous metals and their alloys, heat-resistant alloys,
titanium alloys and non-metallic materials. |
| YG8 | 14.75 | 89.0 | 2200 | It is suitable for roughing of cast iron, non-ferrous metals and
their alloys, heat-resistant alloys and titanium alloys. It has
high impact resistance and is suitable for continuous and
interrupted cutting. |
| M05 | YS8 | 13.90 | 92.5 | 1800 | It is suitable for the finishing of iron-based, nickel-based
superalloys and high-strength steels. It is also suitable for the
finishing of chilled cast iron, heat-resistant stainless steel,
high-manganese steel, hardened steel and glass products. |
| M10 | YW1 | 13.0 | 91.5 | 1600 | Suitable for semi-finishing of stainless steel and common alloy
steel. |
| M20 | YS2T | 14.40 | 91.5 | 2500 | Suitable for finishing and semi-finishing of stainless steel and
low alloy steels and iron-based alloys, as well as for integral
milling of low alloy steels. |
| YW2 | 12.9 | 91.0 | 2000 | Suitable for finishing and semi-finishing and light-load roughing
of stainless steel and alloy steel. |
| M30 | YL10.2 | 14.50 | 92.0 | 2800 | Suitable for high temperature alloys, heat resistant alloys,
titanium alloys, etc., especially for coarse and semi-finishing of
aerospace materials, allowing intermittent turning with increased
rake angle. |
| P10 | YC10 | 10.31 | 92.0 | 1600 | Suitable for finishing steel and cast steel, with cutting speed and
low feed low depth. |
| P20 | YC201 | 11.79 | 91.8 | 1800 | Suitable for semi-finishing and light-load roughing of steel, cast
iron and stainless steel, it is a universal mark with good
applicability. |
| YS25 | 13.0 | 90.5 | 2200 | Specially used for rough milling of steel and cast steel. |
| YT14 | 11.40 | 90.5 | 1800 | Specially used for semi-finishing of steel and cast steel. |
| P30 | YT5 | 12.81 | 89.5 | 1900 | Specially used for heavy cutting of steel and cast steel, in the
case of poor working conditions, roughingwith medium and low speed
and large feed. |
| YC330S | 12.95 | 90.5 | 2200 | Specially used for milling of steel and cast steel, it has good
toughness and good impact resistance, and is the preferred grade
for gravity milling. |
| P40 | YC45 | 12.75 | 90.0 | 2550 | Suitable for gravity cutting of steel and cast steel, it can be
used for large cutting, also for section milling. |
With high quality raw material and advanced equipment, G.S.carbide
provides customer superior quality Hard Alloy Bars Blank.
1. Easy to be brazed, good wear resistance and toughness.
2. Untrafine grain size raw material to keep excellent strength and
hardness.
3. Both standard sizes and customizes sizes are available.
